Stainless Steel Sensor Kitchen Faucets Touch Inductive Sensitive Faucet Tap Single Handle
Material: 304 stainless steel
Surface treatment: brushed
Spool: ceramic spool
Product features: curved pipe 360° rotation
Suitable for aperture: diameter 35-45mm
Hose length: 200mm
Features: hot and cold mixed water
Net weight: 1.6 (kg)
Working temperature: 0 to 90 degrees
The system uses electronic field sensor technology to control the faucet switch
Equipped with smart chips. The system is easy to operate and powerful
Strong anti-interference ability, long life and low power consumption
Suitable for all kinds of faucets.
Touch switch: When you tap the tap, the water will flow. The faucet will turn it off.
Safety to protect: When the water continues to flow for longer than the set time (time check function option), the faucet will automatically close.
Overall contact: easy to operate, the handle is in the "on" position. You can touch anywhere on the peak and the base.
Type split: The controller box is separate from the faucet and therefore easy to install. Can it be maintained?
Low power consumption: When used with a battery, your faucet can use up to 4 AA batteries for up to 1 year.
The system consists of a control box and a waterproof battery case.
1 The battery compartment is placed close to the ground (it would be better if the box was placed on the floor) and the battery cable would be extended.
2 The faucet will be electrically isolated from the table and other pipes. When the plastic gasket is mounted on the metal table, install the plastic gasket.
3 Intake and traction hoses must be insulated.
Step 1: Install and secure the faucet. (see installation diagram)
Step 2: Connect the controller box to the mixing water outlet and connect the inlet and extraction hose.
Step 3: Open the triangular valve and connect the waterway.
Step 4: Connect the battery compartment.
Step 5: It works fine.
“Click” means that your finger (palm or other part) is removed immediately after touching the tap. The distance from the finger to the movement will not exceed 300 milliseconds, or the faucet will be invalid. The water flow exits after touching, and touches again to close.
1* faucet connector
1* sensing module
1* battery case